Pet bottle making Machine SJB-50D

1).High Automatization 2).High Intelligence:The machine can be controlled through touch screen and running status is shown on i

1).High Automatization2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.4).No Contamination:Closed production zone, good self-lubrication system avoid contamination.5).Low Cost:Low consumption of electricity, air and water.6).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.

  

1.Specs

Specification		SJB50D
Material		PE,PP…
Max. container capacity	L	2
Number of die	set	1
Output	pcs/hr	300-400
Machine Dimension	m	2.7×2.0×2.5
Total weight	ton	4
Clamping force	KN	38
platen opening stroke	mm	130-370
platen size	mm	280×370
Max mould size	mm	350×370/205×600
Mould thickness	mm	135-210
Screw diameter	mm	55
Screw L/D ratio	L/D	24:1
Extruding Volume	Kg/hr	60-80
Number of heating zone	zone	3--5
Driving power	KW	7.5
Oil pump power	KW	11
Heating power	KW	10
Actual power	KW	15

2.Configuration

Item name	Brand
Oil pump	Duplex vane pump KEET(Sino-Japan joint)
Hydraulic valve	KEET(Sino-Japan joint)
Proportional valve	KEET(Sino-Japan joint)
PLC	Mitsubishi(Japan)
Touch screen	Xinje(China)
Inverter	EURA (China)
Time relay	CHNT(China)

3. Spare parts(for free)

Item Name	Quantity
Heating coil	6pcs
Small sized Control switch	2pcs
Hydraulic cylinder seals	2pcs
proximityswitch	2pcs
Control switch	2pcs
hydraulic pipe	1pcs
Temperature controller	1pcs
Electric heating	2pcs
Relay	2pcs
Tools	1set

 

  C.Machine Features:C.1. Stable performance with advanced PLC.C.2. Conveying preforms automatically with conveyor.C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.C.8. Strong clamping force with high pressure and double crank links to lock the mold.C.9. Two ways of operating: automatic and manual.C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.C.12. Contamination is avoided for the bottle body.C.13. Ideal effect of the chilling with the chilling system.C.14. Easy installation and startingC.15. Low rejection rate: less than 0.2 percent.